Three way ball valve product introduction
Three way ball valve is generally divided into: type L (Q44F), T(Q45F), Y (Q42F);
L type three way valve: used to switch the flow, can make the twomutually perpendicular connection channel;
T type three way valve: used for medium flow, confluence and flow switch, can make the three channel communicated with each other orthe two channels which connectivity;
Y type three way valve: there are 120 ° and 135 ° two through hole,according to need can be realized on the medium flow switch with two cases.
Repair is convenient: the pressure relief system, without the need to remove the entire body can check and repair.
Widely used in water supply, petrochemical, metallurgy, mine, textile,papermaking, food, energy, iron and steel pipeline system of mediumflow switching to medium and the shunt or mixed fluid.
Three way ball valve product feature
1、Three one or two seat sealing ball valve enjoys compact structure,beautiful appearance, good sealing performance. It can realize the switch the flow in pipe, also can make the two channels are perpendicular to each other connection or close.
2、Switch the four seat sealing three ball valve can not only realize the flow, also can make the three channels are connected to each other,but also to turn off any channel, connected to the other two channels,flexibility control line in medium mixing or shunt.
Three way ball valve technology parameter
Form | Type T、Lthree way ball valve |
Inside nominal diameterDN(mm) | DN15-DN300 |
Nominal pressure | 1.6 2.5 4.0 6.4Mpa |
Liquid range | Air water gas oil and petrochemical products corrosive medium |
Working temperature | Hard seal:-40 --300 Soft seal:-40 --180 |
Spillage | 0 conform to ANSIB16.104standard |
Main material | Valve body 1.WCB 2.304 3.316 4.316L Spool 1.304 2.316 3.316L |
Seat form | Stainless steel movable hard seal、PTFEsoft seal |
Surface preparation | Polishing |
Product Tags:
|
|
Three way ball valve Images
|
